This free geometric distribution calculator finds the probability that the first success comes on trial x, by trial x, after trial x or between two trials, when every trial succeeds with the same probability p. It shows the step-by-step working with your numbers, a bar chart with the outcomes you asked for highlighted, the mean, variance, standard deviation and median, a full geometpdf / geometcdf table and the exact TI-84 keystrokes. It also answers “how many tries do I need to be 95% sure?”, solves for p, and handles both textbook definitions: X = the trial of the first success, or Y = the failures before it.
Contents
How to Use the Geometric Distribution Calculator
- Pick what X counts. Keep X = trial of the first success (1, 2, 3, …) if your question says “on the 3rd try” or “the 5th person asked”. This is what the TI-84 uses. Choose Y = failures before the first success (0, 1, 2, …) if your book counts misses.
- Enter p, the probability of success on each trial. A decimal (0.2), a fraction (1/6) or a percent (20%) all work.
- Pick the probability you need: P(X = x), P(X ≤ x), P(X < x), P(X ≥ x), P(X > x) or P(a ≤ X ≤ b), and type x (and b).
- Read the answer in the purple box. The table under it lists all five probabilities for the same x with the matching TI-84 command, so you can answer a whole homework question at once.
- Open the extras: step-by-step working, TI-84 keystrokes for your numbers and the full probability table. The Trials needed / solve for p tab finds the number of tries for a target probability, or the p that makes a success likely within n tries.
Results update as you type. Copy share link saves your inputs in the URL. For a fixed number of trials use the binomial distribution calculator instead.
What Is the Geometric Distribution?
The geometric distribution describes how long you wait for the first success in a run of independent yes/no trials. Flip a coin until you see heads, roll a die until you get a 6, ask people one by one until someone says yes: the number of trials it takes is a geometric random variable.
Four conditions make a setting geometric (AP Statistics students remember them as BITS):
- Binary: each trial is a success or a failure.
- Independent: one trial does not change the next.
- Trials until success: you keep going until the first success, so there is no fixed number of trials.
- Same p: the probability of success is the same on every trial.
We write X ~ Geom(p). The only parameter is p. Small p means long waits and a long right tail; large p means the first success usually comes almost at once.
Geometric Distribution Formula
P(X = k) = (1 − p)k−1 · p for k = 1, 2, 3, …
P(X ≤ k) = 1 − (1 − p)k P(X > k) = (1 − p)k
Mean μ = 1 / p Variance σ² = (1 − p) / p² σ = √(1 − p) / p
The first formula says “k − 1 failures in a row, then a success”. The cumulative formula comes from the complement: the first success has arrived by trial k unless the first k trials all failed, which has probability (1 − p)k. There is no long sum to add up. The mode is always 1 (the first trial is the single most likely place for the first success), and the median is the smallest k with 1 − (1 − p)k ≥ 0.5.
Worked Example: p = 0.2, First Success on Trial 3
The calculator opens with this question: 20% of cereal boxes contain a prize. You open boxes one at a time. What is the probability that the first prize is in the 3rd box? Each box is a trial, a prize is a success, p = 0.2 and q = 1 − p = 0.8.
- Exactly 3: P(X = 3) = 0.82 × 0.2 = 0.64 × 0.2 = 0.128. Two empty boxes, then a prize.
- At most 3: P(X ≤ 3) = 1 − 0.83 = 1 − 0.512 = 0.488. A prize somewhere in the first three boxes.
- More than 3: P(X > 3) = 0.83 = 0.512. The first three boxes are all empty.
- Mean: 1 / 0.2 = 5 boxes on average. Variance (1 − 0.2) / 0.2² = 20, so σ = √20 ≈ 4.4721. The median is 4 boxes, below the mean because of the long right tail.
| Question | Probability | TI-84 command |
|---|---|---|
| P(X = 3), exactly | 0.128 | geometpdf(0.2,3) |
| P(X ≤ 3), at most | 0.488 | geometcdf(0.2,3) |
| P(X < 3), fewer than | 0.36 | geometcdf(0.2,2) |
| P(X ≥ 3), at least | 0.64 | 1−geometcdf(0.2,2) |
| P(X > 3), more than | 0.512 | 1−geometcdf(0.2,3) |
Trials or Failures? The Two Definitions
Textbooks define the geometric distribution in two ways, and mixing them up is the most common way to get a geometric question wrong.
| X = trial of the first success | Y = failures before the first success | |
|---|---|---|
| Values | 1, 2, 3, … | 0, 1, 2, … |
| P(= k) | (1 − p)k−1 · p | (1 − p)k · p |
| P(≤ k) | 1 − (1 − p)k | 1 − (1 − p)k+1 |
| Mean | 1 / p | (1 − p) / p |
| Variance | (1 − p) / p² | (1 − p) / p² (the same) |
| Used by | TI-84 geometpdf / geometcdf, AP Statistics, most intro courses | Many probability texts, SciPy with loc = −1, R’s dgeom |
The two are the same model shifted by one: Y = X − 1. “Two empty boxes before the first prize” (Y = 2) is the same event as “the first prize in box 3” (X = 3), and both have probability 0.128. The TI-84 always works in trials, so if your question counts failures, add 1 before you type it in. The calculator does this for you when you choose the Y = failures option and writes the shifted command in the keystroke steps.
At Least, More Than and Between
geometcdf only gives “at most” (P(X ≤ x)). Turn every other wording into that, or into the tail (1 − p)k:
- Fewer than x = at most x − 1:
geometcdf(p, x−1). - At least x = the first x − 1 trials all fail: (1 − p)x−1, or
1−geometcdf(p, x−1). - More than x = the first x trials all fail: (1 − p)x, or
1−geometcdf(p, x). - Between a and b (inclusive):
geometcdf(p, b)−geometcdf(p, a−1). For p = 0.2, P(2 ≤ X ≤ 5) = 0.8 − 0.85 = 0.8 − 0.32768 = 0.47232.
Press Example in the calculator for a dice question: with p = 1/6, the chance you need at least 5 rolls to see the first 6 is (5/6)4 ≈ 0.4823, almost a coin flip, even though the average wait is 6 rolls.
How Many Trials Until You Are 95% Sure?
“How many boxes must I be ready to open to be 95% sure of getting a prize?” Solve 1 − (1 − p)n ≥ 0.95:
n ≥ ln(1 − c) / ln(1 − p), then round up
For p = 0.2 and c = 0.95: ln(0.05) / ln(0.8) = 13.43, so n = 14. Check: P(X ≤ 14) = 1 − 0.814 = 0.9560, while 13 boxes give only 0.9450. Rounding down is a classic slip, because 13 boxes do not reach 95%.
The same formula answers the reverse question. If you want a 95% chance of at least one success within 10 tries, each try needs p = 1 − 0.051/10 ≈ 0.2589. Both are on the Trials needed / solve for p tab, with the TI-84 check.
The Memoryless Property
The geometric distribution is memoryless: P(X > s + t | X > s) = P(X > t). If you have already opened 5 empty boxes, the chance that the next 5 are also empty is still 0.85 = 0.32768, exactly as it was before you started. Past failures do not make a success “due”, which is the gambler’s fallacy in one line. The geometric is the only discrete distribution with this property; its continuous cousin is the exponential distribution.
How to Use geometpdf and geometcdf on a TI-84
geometpdf: exactly x
- Press 2nd VARS to open DISTR.
- Scroll to E:geometpdf( and press ENTER (TI-83 Plus: D:geometpdf().
- On a TI-84 Plus CE (and a TI-84 Plus with a recent OS) a wizard opens: p: 0.2, x value: 3, then Paste and ENTER twice. On older models type
geometpdf(0.2,3)with a comma. - The screen shows 0.128.
geometcdf: at most x
Same steps with F:geometcdf( (TI-83 Plus: E:geometcdf(). geometcdf(0.2,3) = 0.488. For “at least” or “more than”, type 1 − first and use x − 1 or x as in the list above. Unlike normalcdf, geometcdf has no lower bound: it always adds up from trial 1.
A whole table at once
Put a list in the x slot: geometpdf(0.2,{1,2,3,4,5}) returns all five probabilities. To fill a list, open STAT 1, type seq(X,X,1,15) into the L1 header and geometcdf(0.2,L1) into L2. That is also the quickest way to find “trials needed” on the calculator: scroll L2 to the first value at or above 0.95. Try every keystroke on our TI-84 Plus CE calculator online.
Geometric vs Binomial vs Poisson
- Use the geometric distribution (this page) when you repeat a yes/no trial until the first success and ask when it happens.
- Use the binomial distribution calculator when the number of trials n is fixed and you count how many successes: “of 10 boxes, how many have a prize?” The link between them: P(geometric X > n) = P(binomial count = 0 in n trials) = (1 − p)n.
- Use the Poisson distribution calculator for counts of events in a stretch of time or space, with no separate trials, such as calls per hour.
- Use the normal distribution calculator for continuous measurements. Unlike the binomial and Poisson, the geometric is always skewed right, so a normal approximation is never a good shortcut here.
- To count the ways an outcome can happen, use the permutation and combination calculator.
Browse every tool on the math and statistics calculators hub.
Common Mistakes
- Mixing the two definitions. If the question counts failures (“3 misses before the first make”), the TI-84’s x is 4, not 3.
- Using geometcdf for “at least”. geometcdf is “at most”. At least x is 1 − geometcdf(p, x − 1).
- Using x instead of x − 1 for “fewer than” and “at least”.
- Using the geometric with a fixed number of trials. “In 10 boxes, what is the chance of exactly 2 prizes?” is binomial.
- Typing p as a percent. On the TI-84, p must be a decimal: 0.2, not 20.
- Rounding “trials needed” down. Always round n up, then check with geometcdf.
- Expecting a success to be “due”. The geometric is memoryless; the chance of success on the next trial is always p.
Why This Geometric Calculator Is Different
- All six probability types (exactly, at most, fewer than, at least, more than, between), with all five single-x answers and their TI-84 commands in one table.
- Both definitions, trials or failures, with the shift to the TI-84’s trial number written out for you.
- Trials needed and solve for p, with the rounding check most answer keys skip.
- Exact TI-84 keystrokes for your own numbers, including the DISTR menu letters for the TI-84 Plus, TI-84 Plus CE and TI-83 Plus.
- A bar chart and a full table with your outcomes highlighted, plus the mean, variance, standard deviation and median.
- Checked against SciPy and 50-digit mpmath on hundreds of cases, from p = 0.000000001 to p = 1. It accepts fractions and percents, works in dark mode, makes share links and fits a phone screen.
Geometric Distribution Calculator FAQ
TI 84 Calc PRO is not affiliated with or endorsed by Texas Instruments. TI-84 Plus CE is a trademark of Texas Instruments.
About this page